WORK ON THIS PAGE

NAPCO Rack Line

Production: Production rate is based on approximately 62 carrier arms per hour. Each arm will support 2 racks for a production rate of 124 racks per hour.

Rack Size (Window): 23" Direction of travel (D.O.T.) x 9" Counter Direction of Travel (C.D.O.T.) x 40" long with 12" long hook.
Effective Surface Area Per Rack: 18 square feet 6 square feet (for rack strip)
Lift Capacity: 150 lbs per carrier arm (75 lbs. gross each rack with parts).
Carrier spacing: 30"e
Type of carrier: Double File
Total carriers: 74
Approx. cycle time: 58 seconds
Approx. Transfer time: 30 seconds
Approx Dwell time: 28 seconds
Anode rod centers: 23"
Sprocket centers: 88' - 6"
Solution Level: 51" (All Process Tanks except zinc) 70" (Zinc Tank)
Solution free board: 4"
Presentation layout: ECO 1 TRMM/12761/c
Electrical characteristics: 480 volt/3 Phase/60 Hertz
Hot water heat: 220 deg F pressurized
Heat-up time: 3 hours
Coolling water temperature: 45" F chilller

Haz clic en los fotitos para una version mas grande

Para mirar estes maquinas a su convencia, llama Tom Lekander a los 210-696-6300 o mandanos un e-mail