R48-24-3231100: 120 GPM Commercial RO System

R48-24-3231100: 120 GPM Commercial RO System

$173,300 (USD)

San Antonio, TX

orCall +1 (210) 696-6300


R48-24-321100 Commercial RO System

120 GPM Reverse Osmosis System with Micro Processor Controller and Auto Flush

• Powder coated steel frame

• FRP multi-port pressure vessels

• 316 SS Pre-filter housing

• Heavy-duty multi-stage centrifugal pump

• Electronic Controller with feed and product water conductivity meter, percent ionic rejection, and alarm output

• Automatic inlet valve

• Low-pressure shutdown with automatic restart

• Tank level input

• Pretreatment interlock input

• Adjustable reject recycle

• Prefilter pressure gauges

• Programmable concentrate flush (Auto Flush)

• Panel mounted liquid filled pressure gauges

• Product, reject, and reject recycle flow meters

• Product check valve

Maximum Productivity (gallons per minute) 120

Quality (typical membrane percent rejection) 99%

Recovery (adjustable) 65% - 75%

Membrane Size 8” x 40”

Membrane Array (four elements per vessel) 3:2:1

Prefilter (system ships with five-micron cartridges) 7 round x 40"

Feed Water Connection 3" Flange

Product Water Connection 2.5" Flange

Reject Water Connection 1.5" Flange

Feed Water Required (GPM at 65% recovery) 185

Minimum Feed Water Pressure 20 PSIG

Drain Required (maximum) 185

460 VAC, 3-phase, 60Hz (other voltages available) 40 amps

Motor Horse Power (TEFC Motor) 30

Dimensions W x D x H (approximate) 196" x 43" x 80"

Shipping Weight (estimated pounds) 3800


Wt. (lbs.)3800.0
Typical rejection99%
Feed / drain req.*(gpm)185
Membrane size8" x 40"
Recovery (adjustable)65% - 75%
Pump hp30/TEFC
Dimensions196" x 43" x 80"
Feed water cnxn.3" Flange
Amps (based on model)40
Electrical requirement460VAC/60Hz
Drain requirement (maximum)185
Feed water pressure requirement (min.)20 PSIG
Reject water connection1.5" Flange
Product water connection (80 & 100 gpm)2.5" Flange
Feed water connection3" Flange