ESI-200-ISO

200 GPM Clarifier | Model: ESI-200-ISO

Design Criteria

Operating Temperature: Ambient conditions

Installation Type: Indoor use

Hydraulic Retention Time: 13 minutes at peak flow

Surface Loading Rate: 0.32 gallons per minute per square foot at maximum flow

Target Solids Removal Efficiency: Greater than 95% with 200 ppm influent

Underflow Solids Concentration: Between 1% and 2%

System Specifications

Maximum Design Flow: 200 gallons per minute

Flash Mixing Chamber Volume: 105.3 gallons

Flocculation Chamber Volume: 635.3 gallons

Sludge Storage Capacity: 611 gallons

Total Plate Surface Area: 1,153 square feet

Effective Settling Area (Projected): 633 square feet

*** Note: Some listed options may not be part of the quoted scope.

Construction Materials

Tank and Frame: ¼-inch thick carbon steel

Internal Coating: Two layers of Tnemec Series 61 (cycloaliphatic amine epoxy)

External Finish: Dual coat of Tnemec Series 1094 (UV-resistant urethane)

Inclined Plates: PVC

Weight and Volume

Shipping Weight: Approximately 11,000 pounds

Operational Weight: Around 32,760 pounds

Total Liquid Capacity: 2,609 gallons

Physical Dimensions

Overall Size: 163 in. (L) × 77 in. (W) × 147 in. (H)

Effluent Outlet: One (1) 6-inch Class 150 ANSI flange

Solids Discharge Ports: Two (2) 4-inch Class 150 ANSI flanges

Sludge Sampling Connections: ½-inch NPT ports at upper and lower sludge chambers

If you would like a personalized quotation on a new custom-made clarifier, please contact us via email at sales@envirosolutions.com, OR via telephone at 210-696-6300 so that we may better assist you.