R14-01-1WM: 1800 GPD Wall-mounted RO System

R14-01-1WM: 1800 GPD Wall-mounted RO System

$13,345 (USD)

San Antonio, TX

orCall +1 (210) 696-6300

Description

R14-01-1WM Wall-Mount Model RO System w/ Adjustable Recovery

1800 GPD Wall Mounted Reverse Osmosis System


Model: R14-01-1WM

Series: R14


• Stainless steel frame

• Stainless steel pressure vessels

• Pre-filter housing and cartridge, 10" Full-Flow

• Webtrol® multi-stage centrifugal pump

• Automatic inlet valve

• Low-pressure shut-off with automatic restart

• Tank level input

• Pretreatment interlock input

• Adjustable recycle line

• Pre-filter pressure gauges

• Pump discharge pressure gauge (liquid filled)

• Flow meter for product water

• Flow meter for reject water

• Check valve for product water

• Sample valve for product water

• On / off switch


GPD: 1,800

Pump HP: 1

Recovery (Adj.) 15%-75%

Membrane Size: 4" x 40"

Membranes: 1

Fittings & Valves: Stainless Steel

Feed Water Required (GPM): 2.5

Feed water connection: 1" FNPT

Product water connection (1800 & 3600 GPD): 1/2" tube

Product water connection (5400 GPD): 5/8" tube

Reject water connection (all R14 models): 1/2" tube

Feed water pressure requirement (minimum): 10 PSIG

Drain requirement (maximum): 10 GPM

Electrical requirement: 230v/60hz

Amps (1800 & 3600 GPD): 6

Amps (5400 GPD): 9


Notes: Performance specifications are based on 77°F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Pro® FPMB-BB5-10 melt blown cartridge. Systems are designed for use with municipal and well water.

Specifications

ManufacturerWatts
ModelR14-01-1WM
ConditionNew
GPD1,800
Recovery (adjustable)15%-75%
Feed water req.* (gpm)2.5
Wt. (lbs.)200
Typical rejection98%
Membranes1
Membrane Size4" x 40"
Pump HP1
Dimensions41" x 51" 18"
Electrical requirement230v/60hz
Amps6
Drain requirement (maximum)10 GPM
Feed water pressure requirement (min.)10 PSIG
Reject water connection1/2" tube
Product water connection1/2" tube
Feed water connection1" FNPT
Fittings & ValvesStainless Steel