R-13 Compact Wall Mount Reverse Osmosis System

R-13 Compact Wall Mount Reverse Osmosis System

Contact us for price

San Antonio, TX

orCall +12106966300

Description

R-13 with optional stand Standard Features: Powder coated steel frames Inlet solenoid valve Pre-filter 1/2 HP motor Brass pump Liquid filled pre-filter pressure gauge 2 1/2" liquid filled pump pressure gauge Product water & reject water flow meters High pressure, non-metallic membrane housings SS needle valves for concentrate and recycle lines Stainless steel product water check valve On / Off toggle switch Low-pressure shut-off with auto restart Feed water and product water TDS monitor Three models for flow rates to 12000 GPD. For indoor installation only. Applications may include: whole house, ice makers, labs, beverages, coffee shops, and restaurants. Options: Leg kit Product float switch Whole house option* *Includes 300 gal tank, product float switch and repressurization pump with built in controls. Note: Performance specifications are based on 77F feed water, SDI < 3, TDS below1000 ppm, and pH of 8. Individual membrane productivity and rejection rates are based on manufacturers specifications. Please see water temperature conversion charts for production factor. Chlorine reduction and other pre-treatment may be required. Systems are designed for use with municipal and well water.

Specifications

ModelR13-0600
ConditionNew
Electrical requirements120 VAC 60 Hz
Feed water connection3/4" NPTF
Amps8
Pump (h.p.)1/2
Maximum production (gallons per day)600
Average membrane rejectionrate98 %
Recovery (adjustable)17 - 75 %
Membrane size3" x 20"
Number ofmembranes1 (P/N R96320)
Pre-filter (system ships with one 5 micron cartridge)20"
Dimensions, approximate (w x h x d)26" x 36" x 9"
Shipping weight, estimated (lbs.)60
Product water connectiom3/8" Tubing OD
Reject water connection3/8" Tubing OD
Feed water required (max.)2.4 GPM
Feed water pressure (min.)10 PSI
Drain required (max.)2.4 GPM