R13-0600 Compact Wall Mount Reverse Osmosis System

No longer available

R13-0600 Compact Wall Mount Reverse Osmosis System

San Antonio, TX


R13 System (600 GPD Max Avg.) with optional stand

Standard Features include:

Powder coated steel frames

Inlet solenoid valve


1/2 HP motor

Brass pump

Liquid filled pre-filter pressure gauge

2 1/2" liquid filled pump pressure gauge

Product water & reject water flow meters

High pressure, non-metallic membrane housings

Stainless Steel needle valves for concentrate and recycle lines

Stainless steel product water check valve

On / Off toggle switch

Low-pressure shut-off with auto restart

Feed water and product water

TDS monitor

Three models for flow rates to 12,000 GPD.

*** For indoor installation only. ***

Applications may include: whole house, ice makers, labs, beverages, coffee shops, and restaurants.

Available Options:

  • Leg kit
  • Product float switch
  • Whole house option* *Includes 300-gal tank, product float switch, and re-pressurization pump with built in controls.

Note: Performance specifications are based on 77F feed water, SDI < 3, TDS below1000 ppm, and pH of 8. Individual membrane productivity and rejection rates are based on manufacturers specifications. Please see water temperature conversion charts for production factor. Chlorine reduction and other pre-treatment may be required. Systems are designed for use with municipal and well water.

Each system has varying specifications. Please see the spec sheet below to find the best matched system to fit your needs.

For assistance in finding the correct Reverse Osmosis System for you, please do not hesitate to contact one of our representatives via telephone or e-mail.

To place an order, please provide your name, business name, and item(s) of interest to the e-mail: sales@envirosolutions.com


Tel: (210) 696 - 6300


Feed water connection3/4" NPTF
Product water connectiom3/8" Tubing OD
Reject water connection3/8" Tubing OD
Feed water required (max.)2.4 GPM
Feed water pressure (min.)10 PSI
Drain required (max.)2.4 GPM
Electrical requirements120 VAC 60 Hz
Pump (h.p.)1/2
Maximum production (gallons per day)600
Average membrane rejectionrate98 %
Recovery (adjustable)17 - 75 %
Membrane size3" x 20"
Number ofmembranes1 (P/N R96320)
Pre-filter (system ships with one 5 micron cartridge)20"
Dimensions, approximate (w x h x d)26" x 36" x 9"
Shipping weight, estimated (lbs.)60