R4X40 Series Whole House Reverse Osmosis System
No longer available
R4X40 Series Whole House Reverse Osmosis System
Location:San Antonio, TX
Description
Standard Features: Powder coated steel frames Inlet solenoid valve 20" Pre-filter Pre-filter pressure gauge Multistage centrifugal pump Low-pressure protection with microprocessor auto reset 2 1/2" liquid filled pump pressure gauge Stainless steel pressure vessel(s) Product water flow meter Reject water flow meter Concentrate needle valve Non metallic recycle needle valve Feed water and product water TDS monitor Three models for flow rates to 6600 GPD. For indoor installation only. Applications may include: whole house, boiler feed water, humidifiers, greenhouses, process water, or electronics. Options: Product float switch 165 gal tank whole house option* 300 gal tank whole house option* 500 gal tank whole house option* *Includes atmospheric storage tank, product float switch, and repressurization pump with built in controls. Notes: Maximum production are based on 77F feed water, SDI < 1, 1000 ppm TDS, and pH of 7. Individual membrane productivity may vary (+- 15%). May be operatedon other feed waters with reduced capacity. Percent Rejection is based on membrane manufacturers pecifications; overall system percent rejection may be less. *R4X40-3 is available only in 230-volt single phase.
Specifications
Model | R4X40-2 |
Condition | New |
Membrane size | 4" x 40" |
Average membrane rejection | 98 % |
Feed water connection | 3/4" NPTF |
Pre-filter | 2.5" x 20" |
Product water connection | 5/8" tubing OD |
Reject water connection | 5/8" tubing OD |
Feed water pressure (minimum) | 10 PSI |
Electrical requirement* | 20 amps |
Maximum production (gallons per day) | 4400 |
Recovery (user adjustable) | 25 - 75 % |
Number of membranes | 2 |
Feed water required (maximum) | 12 GPM |
Drain required (maximum) | 12 GPM |
Motor horse power | 1 |
Dimensions w x d x h | 26" x 36" x 9" |
Shipping weight (estimated lbs.) | 150 |