R12-1200-2 Series Wall-Mounted Reverse Osmosis Systems

R12-1200-2 Series Wall-Mounted Reverse Osmosis Systems

Contact us for price

Location:San Antonio, TX

orCall +1 (210) 696-6300

Description

Standard Features in Package 1: Stainless steel frame Automatic inlet valve Pre-filter housing and cartridge, 10" Procon pump (brass) 1/2 HP motor 2 1/2" liquid filled pump pressure gauge Stainless steel pressure vessel(s) Needle valve for concentrate and recycle lines SS check valve for product water Product pressure switch with Auto/Off Low-pressure shut-off with automatic restart Additional


Features in Package 2: Pre-filter pressure gauges Product water flow meter Reject water flow meter


Additional Features in Package 3: Automatic fast flush for concentrate Compact, wall mounted systems. Four models for flow rates to 1200 GPD.


Options: Stainless steel leg kit Product water float switch Whole house option* *Includes 300 gal tank, product water float switch, and repressurization pump with built in controls. Notes: Maximum production are based on 77F feed water, SDI < 3, 1000 ppm TDS, and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pre-treatment may be required. Membrane rejection rates arebased on membrane manufacturer's specifications. Pre-filter is Flow-Pro FPMB5-978 melt blown cartridge. Systems are designed for use with municipal and well water.

Specifications

ManufacturerWatts
ModelR12-1200-2
ConditionNew
Typical rejection0.98
Membrane size2-1/2"x40"
Recovery (adjustable)25 - 75 %
Dimensions22"x52"x12"
Feed water connection1/2" NPT
No. of membranes2.0
Gpd1200.0
Package2.0
Wt. (lbs.)70.0
Pump1/2 HP
Amps8
Electrical requirement120 v / 60 Hz
Drain requirement (maximum)2.4 GPM
Feed water pressure requirement (minimum)10 PSI
Feed water requirement (maximum)2.4 GPM
Product water & reject water connection (tubing)3/8"