R14-02-1131100 Series Floor Model RO Systems

R14-02-1131100 Series Floor Model RO Systems

Contact us for price

San Antonio, TX

orCall +12106966300


Standard features (package #1) Powder coated steel frame Stainless stell pressure vessels Pre-filter housing and cartridge (20" Full-Flow) Webtrol heavy-duty multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with automatic restart Tank level input Pretreatment interlock input Adjustable recycle line Pre-filter pressure gauges Pump discharge pressure gauge (liquid filled) Flow meter for product, reject, & recycle water Check valve for product water On / off switch Top quality, attractively priced, fully assembled RO systems. Five models for flow rates to 10,800 GPD. Select the features you want to meet your requirements! Additional features included with package #2 CI-1000 electronic controller with product water conductivity meter and alarm output Programmable concentrate auto flush Note: Performance specifications are based on 77F feed water, 3 SDI or less, TDS below 1000 and pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is FLow-Pro FPMB-BB5-20 melt blown cartridge. Systems are designed for use with municipal and well water.


Feed water req.* (gpm)5.0
Wt. (lbs.)400.0
Typical rejection0.98
Membrane size4" x 40"
Pump hp5.0
Recovery (adjustable)(25%-75%)
Dimensions60" x 18" x 56"
Electrical requirement230VAC/60Hz
Drain requirement (max.)15GPM
Feed water pressure requirement (min.)10 PSIG
Reject water connection3/4" FNPT
Product water connection3/4" FNPT
Feed water connection1" FNPT