R24-08-1131100 Series Commercial RO Systems

R24-08-1131100 Series Commercial RO Systems

Contact us for price

San Antonio, TX

orCall +12106966300

Description

Three models and two design options for flow rates up to 15 GPM Standard features (package #1) Powder coated steel frame FRP multi-port pressure vessels Pre-filter housing & cartridge (20" B-B) Webtrol multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with auto restart Tank level input Pretreatment interlock input Adjustable recycle line Pre-filter Pressure gauges Pump discharge pressure gauge Flow meter for product. reject, & recycle water Check valve for product water Sample valves for product water On / off switch Additional features included with package #2 CI-1000 electronic controller with product water conductivity meter and alarm output Programmable concentrate auto flush Note: Performance specifications are based on 77F feed water, 3 SDI or less, TDS below 1000 and a pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is 20" Full-Flow plasting housing and Flow-Pro FPMB-BB5-20 melt blown filter cartridge. Systems are designed for use with municipal and well water. 24" x 72"

Specifications

ModelR24-08-1131100
ConditionNew
Gal/min10.0
Dimensions96" x
Package2.0
Feed water req.* (gpm)17.0
Wt. (lbs.)800.0
Typical rejection0.98
Membranes7261
Membrane size4" x 40"
Recovery (adjustable)60% - 75%
Pump hp7.5/TEFC
Amps20
Phase3
Electrical requirement230VAC/60Hz
Drain requirement (maximum)17, 21, 25 GPM
Feed water pressure requirement (min.)10 PSIG
Reject water connection3/4" FNPT
Product water connection1" FNPT
Feed water connection1" FNPT