R24-10-1131100 Series Commercial RO Systems

R24-10-1131100 Series Commercial RO Systems
Contact us for price
San Antonio, TX
Description
Three models and two design options for flow rates up to 15 GPM Standard features (package #1) Powder coated steel frame FRP multi-port pressure vessels Pre-filter housing & cartridge (20" B-B) Webtrol multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with auto restart Tank level input Pretreatment interlock input Adjustable recycle line Pre-filter Pressure gauges Pump discharge pressure gauge Flow meter for product. reject, & recycle water Check valve for product water Sample valves for product water On / off switch Additional features included with package #2 CI-1000 electronic controller with product water conductivity meter and alarm output Programmable concentrate auto flush Note: Performance specifications are based on 77F feed water, 3 SDI or less, TDS below 1000 and a pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is 20" Full-Flow plasting housing and Flow-Pro FPMB-BB5-20 melt blown filter cartridge. Systems are designed for use with municipal and well water. 24" x 72"
Specifications
Model | R24-10-1131100 |
Condition | New |
Gal/min | 12.5 |
Dimensions | 96" x |
Package | 2.0 |
Feed water req.* (gpm) | 21.0 |
Wt. (lbs.) | 900.0 |
Typical rejection | 0.98 |
Membranes | 7321 |
Membrane size | 4" x 40" |
Recovery (adjustable) | 60% - 75% |
Amps | 20 |
Phase | 3 |
Electrical requirement | 230VAC/60Hz |
Drain requirement (maximum) | 17, 21, 25 GPM |
Feed water pressure requirement (min.) | 10 PSIG |
Reject water connection | 3/4" FNPT |
Product water connection | 1" FNPT |
Feed water connection | 1" FNPT |
Pump hp | 7.5/TEFC |