R24-12-1131100: 15GPM Heavy Duty/Commercial RO Systems

R24-12-1131100: 15GPM Heavy Duty/Commercial RO Systems

$54,155 (USD)

San Antonio, TX

orCall +1 (210) 696-6300

Description

R24-12-1131100 Heavy Duty/Commercial RO System

15 GPM Reverse Osmosis System with Micro Processor Control and Auto Flush


Model: R24-12-1131100

Series: R24


• Powder coated steel frame

• FRP multi-port pressure vessels

• 4½" X 20" Pre-filter housing

• Heavy-duty multi-stage centrifugal pump

• Automatic inlet valve

• Low-pressure shutdown with automatic restart

• Tank level input

• Pretreatment interlock input

• Adjustable reject recycle

• Prefilter pressure gauges

• Liquid filled pump discharge, membrane feed, and reject pressure gauges

• Product, reject, and reject recycle flow meters

• Product check valve

• Electronic Controller with product water conductivity meter.

• Programmable concentrate flush (Auto Flush)


Maximum Productivity GPM: 15

Quality (typical membrane percent rejection): 98%

Recovery (adjustable): 60% - 75%

Membrane Size: 4" x 40"

Membrane Array: 3:2:1

Prefilter: 20" BB

Feed Water Connection: 1" FNPT

Product Water Connection: 1" FNPT

Reject Water Connection: 3/4" FNPT

Feed Water Required: 25

Minimum Feed Water Pressire: 20 PSIG

Drain Required: 25 Maximum

Electrical Requirement: 230 VAC, 3-phase, 60Hz, 20Amps

Motor Horse Power /Type: 7.5/TEFC

Dimensions LWH: 93" x 24" x 68"

Shipping Weight: 1000lbs

Maximum production based on a feed water of 77°F, SDI < 3, 1000 ppm TDS, and pH 8. Individual membrane productivity may vary (± 15%). May be operated on other feed waters with reduced capacity. Percent rejection is based on membrane manufacturer's specifications; overall system percent rejection may be less.

Specifications

ManufacturerWatts
ModelR24-12-1131100
ConditionNew
Gal/min15.0
Recovery (adjustable)60% - 75%
Feed water req.* (gpm)25.0
Wt. (lbs.)1000.0
Dimensions93" x 24" x 68"
Pump hp7.5/TEFC
Amps20
Phase3
Electrical requirement230VAC/60Hz
Drain requirement (maximum)25 GPM
Feed water pressure requirement (min.)10 PSIG
Reject water connection3/4" FNPT
Product water connection1" FNPT
Feed water connection1" FNPT
Membrane size4" x 40"
Typical rejection0.98