R44 Series Commercial RO Systems

R44 Series Commercial RO Systems

Contact us for price

San Antonio, TX

orCall +12106966300

Description

Standard features (package #1) Powder coated steel frame FRP multi-port pressure vessels Stainless steel pre-filter and cartridges Webtrol multi-stage centrifugal pump Automatic inlet valve Low-pressure shut-off with auto restart Tank level input Pretreatment interlock input Flow meter for product, reject, & recycle water Adjustable recycle line Pre-filter pressure gauges Pump discharge pressure gauge Check valve for product water Sample valves for product water On / off switch Three models and two design options for flow rates up to 30 GPM Additional features included w/ package #2 CI-1000 electronic controller with product water conductivity meter and alarm output Programmable concentrate auto flush Note: Performance specifications are based on 77F feed water, 3 SDI or less, TDS below 1000 and a pH of 8. Please see water temperature conversion charts to determine actual production rate for each installation. Chlorine reduction and other pretreatment may be required. Membrane rejection rates are based on membrane manufacturer's specifications. Pre-filter is Flow-Max FM4X3 filter housing, constructed using 316 stainless steel and 2" MNPT pipe fittings and Flo-Pro FPMB-BB5-30 melt blown filter cartridge. Systems are designed for use with municipal and well water. Membranes: 4:2 26" x 72"

Specifications

ModelR44-24-11110
ConditionNew
Package1.0
Feed water req.* (gpm)46.0
Wt. (lbs.)1800.0
Typical rejection0.98
Membrane size4" x 40"
Recovery (adjustable)65% - 75%
Gal/min30.0
Dimensions192" x
Amps30
Electrical requirement230VAC/60Hz
Drain requirement (maximum)31, 39, 46 GPM
Feed water pressure requirement (min.)10 PSIG
Reject water connection1" Flange
Product water connection1.5" Flange
Feed water connection2" Flange
Pump hp10/TEFC
Phase3